Canoe and Boatbuilding Kits
With Free Plans

A range epoxy resin kits for canoes and boats with when you buy the resin kit the plans are included for free !

 
 Pram Dinghy 2.3 metres long, 1.4 metre beam ( 7' 6" x 4' 6" ) 
 UK Epoxy Resins Designed Pram Dinghy   Jacqui is an ideal starter to boat build it is built using the stitch and tape method of construction. The kit contains all your adhesive and coating materials, you will need to provide 3 sheets of 6 mm marine ply or good quality WBP exterior grade, some timber for the capping rails around the gunwale and for the seat supports. If you are building the sailing version 2 lengths of spruce for the mast and sprit. All lofted sizes are given on the drawing which is printed on an A1 sheet.

The dimensions for the spritsail are given and can be made cheaply using woven polyethylene
 
 

U K Epoxy Resins Free plans

The kit contains the following
3.75 Epoxy resin and hardener  2 to 1 Ratio Pump set for measuring resin
0.5 kg High density filleting blend  25 metres Fibreglass tape 50 mm wide
 5 off 12 mm laminating/glue brushes 1 pack Plastic cable ties for stitching
2 off 50 mm laminating/glue brushes plastic squeegee.
  A1 Highly detailed drawing sheet for "Jacqui" UK Epoxy Resins instruction leaflet

To buy all of this in proprietary cut out kit form will cost you over £550 to build.
Our Resin and Free Drawing/Kit is just £110.70

To our secure online  store
Epoxy Resin rule
 
 17' 6" x 2' 8" Sailing/Camping Canoe    A Victorian Gentlemans Sailing Canoe
 
This is a sailing canoe with a difference, it has 5 watertight compartments and a reinforced mid section a 6' 6" long cockpit that you either paddle or row from. With the dagger board and rudder up it draws 4" fully laden. Fast under oars and fun to sail and with clear interior you can even sleep full length aboard, ideal expedition and camping boat. Great family project ! You provide the 4 sheets of 4 or 6 mm and a single sheet of 8 or 9 mm marine or exterior WBP plywood some small section Spruce or Douglas fir for the stringers. The timber used for the building Jig will be used to make both sets of masts and spars. Drawings for battened fan sails are provided they can be made simply and cheaply using woven polyethylene.
The full set of 4 A1 size drawings will be provided free with the Resin/ hardener Canoe kit.
To buy a smaller version of this style in a pre cut kit form would cost you over £1100 to build.
Our Resin and Free Drawing/Kit is just £221.40
To our secure online  store
Sailing Canoe Plans and Kit
Free plans Sailing Canoe
Free plans canoe
The Kit Contains the following:
7.5 Kg epoxy resin/hardener
2 kg filleting blend
Pump measuring set
Glass tape for Joints
Brushes and squeegee
Epoxy Instruction leaflet
4 A1 size ready lofted highly detailed drawings

 Epoxy Resin rule
 
10' 6" x 4' 9" Rowing Skiff "Tensix"
Rowing Boat Free Pans This boat can be made from 4 sheets of plywood 2 x 10 mm and 2 x 8 mm and some 2" x 1" for capping rails and seat supports. This boat is designed for hard work it has lots of in built buoyancy, it does not require a building jig.
Ideal for fishing or just pottering about moves well under oars and it will take a small outboard.
 Epoxy Resins designed 10 The Kit Contains the following:
7.5 Kg epoxy resin/hardener
1 kg filleting blend
Pump measuring set
Glass tape
Brushes and squeegee
U K Epoxy Instruction leaflet
1 A1 size ready lofted highly detailed drawing
To buy a similar version of this boat in a pre cut kit form will cost you over £750 to build.
Our Resin/Drawing Kit is just £221.40
To our secure online  store
 
 
15' 6" Canadian Canoe Resin Kit
To buy a similar version of this boat in a pre cut kit form will cost you over £750 to build.
Our Resin/Drawing Kit is just £148.80

To our secure online  store
The Kit Contains the following:
3.75 Kg epoxy resin/hardener
1 kg filleting blend
Pump measuring set
Glass tape
Brushes, cable ties and squeegee
U K Epoxy Instruction leaflet
A1 size ready lofted highly detailed drawing
Canoe Plans
 You supply 3 sheets of 4 mm marine or WBP exterior grade ply and some 2" x 1" for gunwale and seat frames and a short length of 4" x 1" for the centre cross brace and rail spacers. The canoe will carry two adults with ease . Does not need a building jig drawing for paddles also included We supply the resin kit and a free ready lofted A1 size drawing
  11' 9" Canadian Canoe Resin Kit or Canoe Plans
12 Foot Canoe The Kit Contains the following:
3.75 Kg epoxy resin/hardener
1 kg filleting blend
Pump measuring set
Glass tape
Brushes, cable ties and squeegee
U K Epoxy Instruction leaflet
1 A1 size ready lofted highly detailed drawing

To our secure online  store
To buy a similar version of this boat in a pre cut kit form will cost you over £700 to build.
Our Resin/Drawing Kit is just 148.80

  You supply 3 sheets of 4 mm marine ply and some 2" x 1" for gunwale and seat frames and a short length of 4" x 1" for the centre thwart . The canoe will carry a large adult with ease Ideal childrens boat . Does not need a building jig a drawing for paddles also included We supply the resin kit and a free ready lofted A1 size drawing
 Epoxy Resin rule
 
Newburgh Canoe 
Click image to see Newburgh being Built

This boat can be built with
3 sheets marine ply 4 or 6 mm thick
Plus a 1/4 sheet for buoyancy tank seat tops
6 metres 20 x 40 mm Douglas fir
4 of by 5 metre 12 x 40 mm Douglas fir or
hardwood for gunwales.

Approximate weight using 4 mm ply=26 kg
Approximate weight using 6 mm ply=36 kg
Tools needed
Jigsaw
Power drill
Small plane
Sandpaper
  The kit contains the following
7.5 kg Pack of Epoxy Resin and Hardener
1 kg of High Density Filleting mix
1 x 50 metre roll of woven glass tape
pack of 2 squeegees
1 pack of gloves
1 set of Measuring Pumps
Mixing sticks

1 pack of 5 brushes 12 mm
1 pack of 5 brushes 50 mm
1 pack of cable ties
1 litre of cleaning solvent
1 pack of mini roller inserts
1 mini roller frame
1 mini roller tray


Our Resin/Drawing Kit is just £228.00

  Two A1 highly detailed drawings including full size templates for the curved plank ends, portage yoke and paddles. To our secure online  store
 
 
U K Epoxy Canoe Plans


You Supply

Materials List.

3 sheets of 4 or 6 mm Marine plywood
( You can use good quality exterior ply )

4 lengths 20 x 15 Ash or other hardwood 4.2 metre long
for the inner and outer gunwales .

4 metre of 25 x 40 mm Ash or other hardwood for the seat frames

5 metre 20 x20 Ash or other hardwood for protective runners

16 metres of 40 mm wide webbing for the seats

Kit Contents
7.5 kg Pack of Epoxy Resin and Hardener
1 kg of High Density Filleting mix
1 x 50 metre roll of woven glass tape
1 pack of squeegees
1 pack of gloves
1 set of Measuring Pumps
Mixing sticks
1 pack of 5 brushes 12 mm
1 pack of 5 brushes 50 mm
1 pack of cable ties
1 litre of cleaning solvent
1 pack of mini roller inserts
1 mini roller frame
1 mini roller tray
Our Resin/Drawing Kit is just
£228.00





To our secure online  store
   Two A1 highly detailed drawings including full size templates for the curved plank ends, portage yoke and paddles.
 
15' 9" Overall length by 5' 2" Beam Dory Skiff "Morgan"
 
Free Boat Plans

The Kit Contains the following:
15 kg of Epoxy resin/hardener
2 kg high density filleting mix
5 x 1" laminating brushes
5 x 2" laminating brushes
25 Mixing Sticks
5 pairs Latex gloves
Calibrated measuring pumps for resin and hardener.
2 Squeegees bevelled edge
10 Short pile rollers
1 Roller frame
1 Roller tray
2 rolls 50 mm x 50 metre fibreglass tape.
2 rolls 75 mm x 50 metre fibreglass tape.
2 x 1 litre cleaning solvent.
Drawings: 2 A1 pages of ready lofted highly detailed Drawings including drawings of 9' dory oars.
U K Epoxy resins manual >
Morgan
Check out the project gallery
and watch "Morgan" being built
just click the image.
To buy a similar version of this boat in a pre cut kit form will cost you over £2100 to build.

Our Resin/Drawing Kit is just £460.00

To our secure online  store
You supply 6 sheets of 8 or 9 mm marine or exterior ply and the timber for capping rails, mast, sprit pole and boom. You should be able to save in excess of £1700 depending on the type of materials to decide to buy, The dimensions for the spritsail are given and can be made cheaply using woven polyethylene and If you need help we are only a phone call away
 
15' 6" by 4' Traditional Dory with Oar plans
Ideal fishing, picnic boat with built in Buoyancy or just rowing on the river
15-6" Dory Free Plans
This boat can be made from 4 sheets of 6 or 9 mm marine or exterior plywood ( I used 6 mm exterior )
5 lengths of 75 x 15 douglas fir ( redwood ) 5 m long
1 length of 300 x 30 douglas fir ( redwood ) 1 m long
Oars 2 lengths douglas fir or spruce 60 x 60 x 3 m long
4 lengths douglas fir or spruce 30 x 60 x 750 mm long
23 metre 20 x 40 douglas fir
4 metres 40 x 40 douglas fir
This boat is designed for hard work it is ideal for fishing or rowing on the river it makes an ideal picnic boat,
it moves well under oars and it will take a small outboard This boat has lots of in built buoyancy and does
not require a building jig.
15, 6" Dory Plans
Oar Plans
The Kit Contains the following:
7.5 Kg epoxy resin/hardener
1 kg filleting blend
Pump measuring set
Glass tape
Brushes and squeegee
U K Epoxy Instruction leaflet
1 A1 size ready lofted highly detailed drawing
Our Resin/Drawing Kit is just
£221.40

To our secure online  store
 
 
Home free plansTo our secure online  store
 

Material Copyright © 2000 UK Epoxy Resins